
For outdoor tours, festivals and rental fleets, a wattage label is only the beginning of the comparison. The 550W BEAM IP66 uses a 380W USHIO NSLU6C lamp; 550W is the published total fixture rating. The separate 380W / 420W Outdoor IP66 Prism Beam Moving Head offers an OSRAM 380W / 550W-total configuration and a Philips 420W / 650W-total configuration. These are not three labels for the same specification.
Compare the beam angle, front lens, prism functions, rigging weight and sealed power/DMX connections together. The 1.7° beam, 160 mm lens, 8- and 24-facet prisms and 25 kg net weight belong to the USHIO model. The other product publishes 1.8°, 165 mm, six prisms and 19.8 kg. Neither lamp wattage nor lens diameter alone proves greater outdoor brightness.
Core Specification Comparison
Source: the two linked product pages, checked on 16 November 2026. The Prism Beam page lists shared optical, control, size and weight data for its 380W and 420W options; the duplicated cells below reflect that shared listing, not separate variant test reports. For any value not published: confirm against the exact shipping version and measured photometric report.
| Published specification | 550W BEAM IP66 — USHIO 380W | Prism Beam — OSRAM 380W variant | Prism Beam — Philips 420W variant |
|---|---|---|---|
| Lamp / rated fixture power | USHIO NSLU6C 380W / 550W total | OSRAM 380W / 550W total; exact lamp code not published | Philips 420W / 650W total; exact lamp code not published |
| Beam angle / front lens | 1.7° / 160 mm | 1.8° / 165 mm | 1.8° / 165 mm |
| Colour temperature | 7900K ±500K | 7800–8500K | 7800–8500K |
| Prisms | 8-facet + 24-facet; simultaneous stacking not explicitly confirmed | 6 prisms; 15 stackable combinations; bidirectional rotation | 6 prisms; 15 stackable combinations; bidirectional rotation |
| Focus / frost | Motorized focus / independent frost | Electronic linear focus / 0–100% linear frost | Electronic linear focus / 0–100% linear frost |
| DMX / RDM | DMX512, 16 channels; RDM not listed | DMX512 + RDM, 20 channels | DMX512 + RDM, 20 channels |
| Housing / protection | Full die-cast aluminium, black baked finish / IP66 | Full die-cast aluminium, no plastic / IP66 | Full die-cast aluminium, no plastic / IP66 |
| Fixture dimensions / net weight | 631 × 403 × 289 mm / 25 kg | 329 × 228 × 603 mm / 19.8 kg | 329 × 228 × 603 mm / 19.8 kg |
| Power / signal connections | Waterproof power in/out; waterproof 3-pin/5-pin DMX in/out — confirm supplied pin option | Connector types and pin options not published | Connector types and pin options not published |
| Supply / operating temperature | AC100–240V, 50/60Hz / −10°C to 40°C | AC100–240V, 50/60Hz / operating temperature not published | AC100–240V, 50/60Hz / operating temperature not published |
| Transport packaging | Two-unit flight-case size and loaded weight not published | 2-in-1 flight case: 81 × 41 × 85 cm, 75 kg listed; confirm whether loaded or empty | 2-in-1 flight case: 81 × 41 × 85 cm, 75 kg listed; confirm whether loaded or empty |
Optical Throw, Beam Sharpness & Prism Effects
A 1.7° beam and 160 mm front lens make the USHIO model a candidate for narrow aerial looks on large outdoor stages and landmark projects. For a 100 m sightline, however, these dimensions alone do not establish usable throw or illuminance. Ask for measured lux and beam diameter at the actual distance, with lamp age, colour, frost and prism state recorded. Haze, rain, ambient light and camera exposure can change the apparent result. Compare the 1.8° / 165 mm alternative under the same conditions.
The USHIO model lists 8- and 24-facet prisms. Ask for separate demonstrations and confirmation of simultaneous stacking in the supplied DMX personality before programming an overlapping aerial look; do not assume an 8 × 24 output. The other model explicitly lists six prisms and 15 stackable combinations, including 8, 8+16, 8+8+8 honeycomb, 8+16+24 honeycomb and high/low six-row effects. Splitting one beam into multiple rays changes the light distribution, so check the effect at working distance, not just beside the fixture.
Outdoor Rigging, IP66 Weatherproofing & Rental Logistics
Check the assembled weatherproof system: mating power plugs, signal connectors, unused DMX-port caps, cable strain relief and the permitted mounting orientation. IP66 is an enclosure rating, not permission for immersion or a substitute for the model-specific installation instructions. Both pages specify die-cast aluminium; neither provides a comparative thermal endurance test. Confirm ventilation clearance and ambient limits for the actual unit.
The USHIO fixture weighs 25 kg net; the Prism Beam listing says 19.8 kg. Include clamps, safety attachments, cables and the distribution of loads when planning a truss with the responsible rigger. A two-unit USHIO case contains 50 kg of fixtures before the case and accessories. Its case dimensions are unpublished. The other page lists a two-unit case of 81 × 41 × 85 cm and 75 kg, but does not define whether that mass is loaded or empty. Obtain an approved packing list before calculating truck space or freight charges.
When to Choose 380W (550W Rated) vs 420W IP66 Beam Lights
For medium tours or rental replenishment, shortlist the USHIO 380W / 550W-rated unit when its narrow beam, 16-channel control and existing fleet workflow suit the job. Check the landed quote, replacement-lamp stock, service access and sample performance before calling it the lower-cost choice. Matching wattage does not establish spare-part interchangeability.
For a very large festival or a distant landmark, compare the Philips 420W / 650W-rated option when its measured output at your target distance justifies the additional rated input. Its six-prism system may matter more than the wattage label for multi-ray looks. Also compare the OSRAM 380W / 550W variant if you want that prism/control platform at the lower published input rating. Actual consumption depends on operating conditions; these are ratings, not metered savings.
- Request side-by-side, fixed-exposure footage and photometry at the same distance.
- Confirm lamp part number, DMX personality, connector pinout and supplied cable set.
- Approve a sample, packing drawing, service/spares list and landed quotation for the exact variant.
Does a higher wattage rating always mean a brighter beam outdoors?
No. Lamp efficiency, reflector and lens design, beam angle, optical losses, lamp age and effect settings all affect useful output. Compare measured illuminance at the same distance and beam setting. The published wattage labels do not prove that one of these fixtures is brighter at 100 m.
Why does a 380W lamp beam moving head show 550W total power?
380W identifies the lamp rating. The product page rates the whole fixture at 550W, which accounts for the complete electrical system, including the ballast, motors, cooling and control electronics. It does not mean the lamp is 550W, and the difference is not a measured loss figure. Size power distribution using the supplier’s electrical data for the supplied version.
What accessories should rental companies verify for IP66 beam lights?
Verify the supplied waterproof power connectors and linking cables, DMX connector pin count and protective caps, approved clamps and safety attachments, flight-case layout, lamp/spares availability, user manual and console fixture profile. Confirm what is included in the quotation. A similar connector or wattage does not guarantee compatibility or a sealed assembled connection.
Can 380W and 420W IP66 beam lights run in the same DMX512 universe?
Yes, provided the console has the correct fixture profiles and each fixture has a non-overlapping address range within the universe’s 512 channels. The USHIO model lists 16 channels; the Prism Beam model lists 20. Check DMX pinout, cable chain and termination. RDM is listed for the Prism Beam, but not for the USHIO model; it is not required for basic DMX512 control.
Build a Shortlist from Your Actual Show
Send YL Light your fixture quantity, target distance, event type, destination, voltage and existing console profile. Request a version-specific quote with photometry, sample footage, connector details and a packing drawing. Start with the two product specifications and the detailed 550W buying guide below; use the enquiry page to confirm the final supply configuration.
