Product identification
- Model
- PANTHER-M-P212-F- P212 - Dual 12-inch Active Line Array
- Product category
- Line Array Systems

Tell us about your project and the products you need.
Tell us which models you need. Our team will confirm the available catalogue and documents.
| Website Model | PANTHER-M |
|---|---|
| Company Model | P212-F |
| Configuration | Large-format self-powered dual 12" line array loudspeaker |
| Performance | 150.5 dB maximum sound level; 55 Hz - 16 kHz operating range; 95° horizontal coverage |
| Drivers | LF 2 x 12" long-excursion cone drivers; HF 2 x 3" diaphragm compression drivers |
| Dimensions / weight | 38.15 x 14.85 x 22.25 in / 969 x 377 x 565 mm; 150 lb / 68 kg |
| Power / protection | 200-240 V AC, 50/60 Hz; 1100 W max long-term; 2200 W burst; IP55 with terminated Neutrik TOP cables |
| Connectors / enclosure | XLR 3-pin TOP in/loop, etherCON TOP AVB, powerCON TRUE1 TOP; premium multi-ply birch cabinet |
Function / configuration: Large-format self-powered dual 12-inch line array loudspeaker. 150.5 dB maximum sound level, 55 Hz-16 kHz operating range, 95-degree horizontal coverage, Milan AVB connectivity and 68 kg net weight.


The stated IP55 protection applies only with the specified, properly terminated Neutrik TOP cabling. Protection of the complete installation depends on the connector, cable termination and installation conditions; the rating is not an unconditional waterproof claim.


The stated IP55 protection applies only with the specified, properly terminated Neutrik TOP cabling. Protection of the complete installation depends on the connector, cable termination and installation conditions; the rating is not an unconditional waterproof claim.

The source specifies Meyer Sound MAPP prediction or load verification for the illustrated system configuration. Use the applicable model data, hardware and current load documentation; an illustration or prediction is not a measured coverage result or suspension approval for another configuration.

The source specifies Meyer Sound MAPP prediction or load verification for the illustrated system configuration. Use the applicable model data, hardware and current load documentation; an illustration or prediction is not a measured coverage result or suspension approval for another configuration.


The source describes a Milan Certified endpoint and specifies Neutrik interfaces. Certification and networking support apply to the documented endpoint hardware and firmware; this description does not certify every YL-branded configuration.

The illustrated accessory relationship is specific to the LYON-compatible hardware and stated manufacturer load conditions. Confirm the exact frame, pins, attachment points and load chart for the proposed assembly before suspension.



PANTHER-M-P212-F- P212 - Dual 12-inch Active Line Array